Specification:
HW172
Tray Cable – Power Cable
600 Volt UL Type TC-LS, 90°C
XLP, XHHW-2 Insulation
Low Smoke Zero Halogen Jacket
Tinned Copper Conductors
FM Approved (8 AWG – 4/0 AWG)
| Catalog Number | Size AWG/kcmil | Number of Conductors | Number of Strands | Insulation Thickness | Ground Wire Size AWG | Jacket Thickness | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|---|
| HW172 00803 | 8 | 3 | 7 | 45 | - | 60 | 0.63 | 238 |
| HW172 00804 | 8 | 4 | 7 | 45 | - | 60 | 0.70 | 305 |
| HW172 0803G | 8 | 3 | 7 | 45 | 10 | 60 | 0.63 | 267 |
| HW172 0804G | 8 | 4 | 7 | 45 | 10 | 60 | 0.70 | 339 |
| HW172 00603 | 6 | 3 | 7 | 45 | - | 60 | 0.71 | 390 |
| HW172 00604 | 6 | 4 | 7 | 45 | - | 60 | 0.78 | 497 |
| HW172 0603G | 6 | 3 | 7 | 45 | 8 | 60 | 0.71 | 437 |
| HW172 0604G | 6 | 4 | 7 | 45 | 8 | 60 | 0.78 | 495 |
| HW172 0403G | 4 | 3 | 7 | 45 | 8 | 80 | 0.81 | 612 |
| HW172 0404G | 4 | 4 | 7 | 45 | 8 | 80 | 0.94 | 814 |
| HW172 00403 | 4 | 3 | 7 | 45 | - | 80 | 0.81 | 564 |
| HW172 00404 | 4 | 4 | 7 | 45 | - | 80 | 0.94 | 763 |
| HW172 0203G | 2 | 3 | 7 | 45 | 6 | 80 | 0.98 | 867 |
| HW172 0204G | 2 | 4 | 7 | 45 | 6 | 80 | 1.08 | 1087 |
| HW172 1003G | 1/0 | 3 | 19 | 55 | 6 | 80 | 1.2 | 1390 |
| HW172 1004G | 1/0 | 4 | 19 | 55 | 6 | 80 | 1.34 | 1934 |
| HW172 2003G | 2/0 | 3 | 19 | 55 | 6 | 80 | 1.30 | 1676 |
| HW172 4003G | 4/0 | 3 | 19 | 55 | 4 | 80 | 1.53 | 2523 |
| HW172 4004G | 4/0 | 4 | 19 | 55 | 4 | 110 | 1.79 | 3630 |
| HW172 2503G | 250 | 3 | 37 | 65 | 4 | 110 | 1.78 | 3296 |
| HW172 2504G | 250 | 4 | 37 | 65 | 3 | 110 | 1.06 | 4210 |
| HW172 3503G | 350 | 3 | 37 | 65 | 3 | 110 | 2.00 | 3643 |
| HW172 3504G | 350 | 4 | 37 | 65 | 3 | 110 | 2.21 | 4743 |
| HW172 5003G | 500 | 3 | 37 | 65 | 2 | 110 | 2.29 | 6116 |
| HW172 5004G | 500 | 4 | 37 | 65 | 2 | 110 | 2.54 | 7881 |
| HW172 7503G | 750 | 3 | 61 | 80 | 2/0 | 140 | 2.81 | 9101 |
Application:
LifeGuard Low Smoke Zero Halogen cable is for use in power, control and lighting circuits in a broad range of commercial and industrial applications where shielding from ambient electrical interference is required. It is highly flame retardant, produces very small amounts of smoke when burned and contain no halogens. LifeGuard cable is ideal for applications where a high degree of safety and equipment protection is required.
LifeGuard cable is NEC listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I and II, Division 2 hazardous locations. It is NEC approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
Product Features:
•FM Approved per cable fire propatation Standard 3972, Group 1
•Tray rated
•Sunlight-resistant
•Approved for direct burial
•Tinned conductors provide ease of termination and added protection in caustic environments
•Very low smoke production when burned
•LifeGuard jacket produces zero halogens during fire – less toxic and corrosive
•LifeGuard jacket is environmentally safe – lead, sulfur and halogen free
•Highly chemical resistant
•Very flame retardant
•Burns to an ash – does not exhibit thermoplastic drip
•Excellent compression and impact resistance
•Superior tensile strength and abrasion resistance
•Flexible jacket with low coefficient of friction
Conductors:
Tin coated soft annealed copper per ASTM B-33, Class B stranding per ASTM B-8
Insulation:
Cross-linked polyethylene (XLP) per UL Standard 44 for Type XHHW-2 conductors
Grounding Conductor:
Soft annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance with UL Standard 1277
Jacket:
•Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277
•A ripcord is applied longitudinally under the jacket to facilitate stripping
Flame Test:
•FM Approved – Class 3972 Specification Test Standard – Cable Fire Propagation Group 1 (8 AWG-4/0 AWG)
•UL Standard 1581 70,000 BTU/hr flame test
•IEEE 383 70,000 BTU/hr flame test
•ICEA T-29-520 210,000 BTU/hr flame test
•IEEE 1202/CSA FT4 70,000 BTU/hr flame test
•UL Standard 1685 70,000 BTU/hr Flame Propagation and Smoke Release Test
Color Code:
ICEA Method 4
Additional Standards:
•NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725
