Specification:
HW257
Magnet Crane Cable – Type W
2000 Volt UL, -40°C to +90°C
EPR Insulation, CPE Jacket
Flexible Copper Conductors
| Catalog Number | Size AWG | No. of Conductors | No. of Strands | Insulation Thickness Mils | Jacket Thickness Mils | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|
| HW257 00802 | 8 | 2 | 133 | 60 | 107 | 0.82 | 355 |
| HW257 00602 | 6 | 2 | 133 | 60 | 125 | 0.92 | 500 |
| HW257 00402 | 4 | 2 | 133 | 60 | 155 | 1.07 | 710 |
| HW257 00202 | 2 | 2 | 133 | 60 | 165 | 1.26 | 970 |
Application:
Portable power cable designed for heavy duty temporary or permanent use where maximum resistance to flex fatigue is required. Used in extremely demanding applications including trailing cable on mobile mining equipment, diesel electric locomotives, lifting magnets, cranes, cutters, loaders, conveyors, drills and pumps where grounded circuits are not required. For use in circuits not to exceed 2000 volts.
Conductors:
Soft bare annealed copper per ASTM B-3, flexible rope lay strand per ASTM B-172.
Insulation:
Ethylene propylene diene monomer (EPDM) rubber per ICEA S-75-381.
Assembly:
Cabled with fillers for roundness, with an open reinforcement over the assembly for mechanical protection.
Jacket:
Double-layer, heavy-duty, oil-resistant thermoset Neoprene rubber per ICEA S-75-381.
Flame Tests:
MSHA flame test
Color Code:
ICEA Method 1
Additional Standards:
Pennsylvania Bureau of Mines – MSHA approved
