Specification:
HW259
Portable Power Cable – Type G-GC
2000 Volt, -40°C to +90°C
Three Conductor
EPR Insulation, CPE Jacket
Flexible Copper Conductors
| Catalog Number | Size AWG/kcmil | No. of Strands | Insulation Thickness Mils | Jacket Thickness Mils | Grounding Conductor Size AWG | Ground Check Conductor Size | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|---|
| HW259 00803 | 8 | 133 | 60 | 143 | 10 | 10 | 0.97 | 675 |
| HW259 00603 | 6 | 133 | 60 | 152 | 10 | 10 | 1.05 | 825 |
| HW259 00403 | 4 | 259 | 60 | 172 | 8 | 10 | 1.19 | 1125 |
| HW259 00203 | 2 | 259 | 60 | 180 | 7 | 10 | 1.34 | 1525 |
| HW259 00103 | 1 | 259 | 80 | 193 | 6 | 8 | 1.51 | 1795 |
| HW259 10103 | 1/0 | 259 | 80 | 203 | 5 | 8 | 1.65 | 2390 |
| HW259 20103 | 2/0 | 259 | 80 | 198 | 4 | 8 | 1.75 | 2790 |
| HW259 30103 | 3/0 | 259 | 80 | 185 | 3 | 8 | 1.89 | 3426 |
| HW259 40103 | 4/0 | 259 | 80 | 207 | 2 | 8 | 2.04 | 4030 |
| HW259 25003 | 250 | 427 | 95 | 267 | 2 | 8 | 2.38 | 5445 |
| HW259 35003 | 350 | 427 | 95 | 283 | 1/0 | 8 | 2.73 | 7273 |
| HW259 50003 | 500 | 427 | 95 | 295 | 2/0 | 8 | 3.02 | 9439 |
Application:
Portable power cable designed for heavy duty temporary or permanent use where maximum resistance to flex fatigue is required. Used in extremely demanding applications including mobile mining equipment, cutters, loaders, conveyors, drills and pumps. For three-phase alternating current circuits, not to exceed 2,000 volts, where grounding conductors and ground check conductors are required.
Conductors:
Soft bare annealed copper per ASTM B-3, flexible rope lay strand.
Insulation:
Ethylene propylene diene monomer (EPDM) rubber.
Grounding Conductors:
Two insulated ground and one insulated ground check, soft bare annealed copper conductors per ASTM B-3, flexible strand sized in accordance with applicable ICEA standards.
Assembly:
Multiple conductor constructions cabled with fillers for roundness, with an open reinforcement over the assembly for mechanical protection.
Jacket:
Chlorinated polyethylene (CPE) rubber.
Flame Tests:
•MSHA flame test
Color Code:
Black, White, Red
Additional Standards:
•ICEA S-75-381
•Pennsylvania Bureau of Mines – MSHA approved
