Specification:
HW101
Instrumentation Cable
300 Volt UL Type PLTC & ITC, 105°C
Single Pair or Triad
Shielded
PVC Insulation
PVC Jacket
Copper Conductors
| Catalog Number | Size AWG | Pair/Triad | Isulation Thickness Mils | Jacket Thickness Mils | Overall Diameter In. | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|
| HW101 02001 | 20 | 1 Pair | 15 | 35 | 0.24 | 30 |
| HW101 2001T | 20 | 1 Triad | 15 | 35 | 0.25 | 36 |
| HW101 1801T | 18 | 1 Triad | 15 | 35 | 0.28 | 46 |
| HW101 01801 | 18 | 1 Pair | 15 | 35 | 0.26 | 37 |
| HW101 01601 | 16 | 1 Pair | 15 | 35 | 0.28 | 46 |
| HW101 1601T | 16 | 1 Triad | 15 | 35 | 0.30 | 62 |
Application:
For use in instrumentation and process control applications where protection from electrostatic interference is required. UL listed as Type PLTC and ITC and approved for installation indoors or outdoors, aerially, in conduits, ducts and cable trays in circuits not exceeding 300 volts. May be used in NEC Class 1, Division 2 hazardous locations.
Conductors:
7-strand soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.
Insulation:
Flame-retardant PVC.
Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.
Jacket:
Sunlight-resistant PVC. A ripcord is applied longitudinally under the jacket to facilitate stripping.
Flame Tests:
•UL 1581 70,000 BTU/hr flame test
•CSA FT4 rated
Color Code:
•ICEA Method 9: black and white for pairs
•ICEA Method 1: black, white and red for triads
•Available upon request: black and red for pairs and black, red and blue for triads
Additional Standards:
•UL Standard 13
•UL Standard 2250
•NEC Type ITC per Articles 501, 502, 503, and 504
•Approved for Class 2 and Class 3 circuits per Article 725 of the NEC
