Specification:
HW105
INSTRUMENTATION CABLE
600 Volt UL Type TC, 90°C
Multiple Pairs
Overall Shield
TFN Insulation
PVC Jacket
Copper Conductors
| Catalog Number | Size AWG | Pair/Triad | Isulation Thickness Mils | Jacket Thickness Mils | Overall Diameter In. | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|
| HW105 01802 | 18 | 2 | 15 | 4 | 45 | 0.41 |
| HW105 01804 | 18 | 4 | 15 | 4 | 45 | 0.49 |
| HW105 01808 | 18 | 8 | 15 | 4 | 60 | 0.65 |
| HW105 01812 | 18 | 12 | 15 | 4 | 60 | 0.76 |
| HW105 01816 | 18 | 16 | 15 | 4 | 80 | 0.89 |
| HW105 01824 | 18 | 24 | 15 | 4 | 80 | 1.03 |
| HW105 01836 | 18 | 36 | 15 | 4 | 80 | 1.18 |
| HW105 01850 | 18 | 50 | 15 | 4 | 80 | 1.44 |
| HW105 01602 | 16 | 2 | 15 | 4 | 45 | 0.45 |
| HW105 01603 | 16 | 3 | 15 | 4 | 45 | 0.52 |
| HW105 01604 | 16 | 4 | 15 | 4 | 45 | 0.57 |
| HW105 01608 | 16 | 8 | 15 | 4 | 60 | 0.75 |
| HW105 01612 | 16 | 12 | 15 | 4 | 60 | 0.88 |
| HW105 01616 | 16 | 16 | 15 | 4 | 80 | 1.03 |
| HW105 01624 | 16 | 24 | 15 | 4 | 80 | 1.21 |
| HW105 01636 | 16 | 36 | 15 | 4 | 80 | 1.40 |
| HW105 01650 | 16 | 50 | 15 | 4 | 80 | 1.61 |
Application:
For use in instrumentation and process control applications where protection from electrostatic interference is required. UL listed as Type PLTC and ITC and approved for installation indoors or outdoors, aerially, in conduits, ducts and cable trays in circuits not exceeding 600 volts. May be used in NEC Class 1, Division 2 hazardous locations.
Conductors:
7-strand soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.
Insulation:
Flame-retardant PVC.
Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.
Jacket:
Sunlight-resistant PVC. A ripcord is applied longitudinally under the jacket to facilitate stripping.
Flame Tests:
•UL 1581 70,000 BTU/hr flame test
•CSA FT4 rated
Color Code:
•ICEA Method 9: black, white and red triads with printed number
•Available upon request: black, red and blue triads with printed number
Additional Standards:
•UL Standard 13
•UL Standard 2250
•NEC Type ITC per Articles 501, 502, 503, and 504
•Approved for Class 2 and Class 3 circuits per Article 725 of the NEC
