Specification:
HW121
Instrumentation Cable
600 Volt Type TC-LS, 90°C
Single & Multiple Triads
Individual and Overall Shield
XLP Insulation
Low Smoke Zero Halogen Jacket
Tinned Copper Conductors
FM Approved
| Catalog Number | Size AWG | No. of Triads | Isulation Thickness Mils | Jacket Thickness Mils | Overall Diameter In. | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|
| HW121 1601T | 16 | 1 | 30 | 60 | 0.35 | 67 |
| HW121 01602 | 16 | 2 | 30 | 60 | 0.64 | 170 |
| HW121 01604 | 16 | 4 | 30 | 60 | 0.74 | 268 |
| HW121 01606 | 16 | 6 | 30 | 60 | 0.93 | 422 |
Application:
LifeGuard Low Smoke Zero Halogen cable is for use in instrumentation and process control applications where protection from electrostatic interference is required. It is highly flame-retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required.
LifeGuard cable is NEC listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class 1, Division 2 hazardous locations. It is NEC approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
Product Features:
•FM Approved per cable fire propagation Standard 2972, Group 1
•Tray rated
•Sunlight-resistant
•Approved for direct burial
•Tinned conductors provide ease of termination and added protection in caustic environments
•Superior electrostatic interference protection from individual and overall shield
•Very low smoke production when burned
•LifeGuard jacket produces zero halogens during fire – less toxic and corrosive
•LifeGuard jacket is environmentally safe – lead, sulfur and halogen free
•Highly chemical resistant
•Very flame retardant
•Burns to an ash – does not exhibit thermoplastic drip
•Excellent compression and impact resistance
•Superior tensile strength and abrasion resistance
•Flexible jacket with low coefficient of friction
Conductors:
7 strand tin coated, soft annealed copper per ASTM B-33, Class B stranding per ASTM B-8
Insulation:
Cross-linked polyethylene (XLP)per UL Standard 44
Individual Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire
Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire
Jacket:
•Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277
•A ripcord is applied longitudinally under the jacket to facilitate stripping
Flame Tests:
•FM Approved – Class 3972 Specification Test Standard – Cable Fire Propagation Group 1
•UL Standard 1581 70,000 BTU/hr flame test
•IEEE 383 70,000 BTU/hr flame test
•ICEA T-29-520 210,000 BTU/hr flame test
•UL Standard 1685 70,000 BTU/hr Flame Propagation and Smoke Release Test
Color Code:
ICEA Method 1: black, white and red twisted triads with numbers
Additional Standards:
•NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725
