Specification:
HW111
Thermocouple Extension Cable
300 Volt UL Type PLTC & ITC, 105°C
Single and Multiple Pairs
Overall Shield
PVC Insulation
PVC Jacket
Solid Alloy Conductor
| Catalog Number | Size AWG | No. of Pairs | Isulation Thickness Mils | Jacket Thickness Mils | ANSI Type | Overall Diameter In. | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|
| HW111 2004E | 20 | 4 | 15 | 40 | E X | 0.40 | 78 |
| HW111 2004J | 20 | 4 | 15 | 40 | J X | 0.40 | 78 |
| HW111 2004K | 20 | 4 | 15 | 40 | K X | 0.40 | 78 |
| HW111 2004T | 20 | 4 | 15 | 40 | T X | 0.40 | 78 |
| HW111 2008E | 20 | 8 | 15 | 50 | E X | 0.52 | 143 |
| HW111 2008J | 20 | 8 | 15 | 50 | J X | 0.52 | 143 |
| HW111 2008K | 20 | 8 | 15 | 50 | K X | 0.52 | 143 |
| HW111 2008T | 20 | 8 | 15 | 50 | T X | 0.52 | 143 |
| HW111 2012E | 20 | 12 | 15 | 50 | E X | 0.61 | 195 |
| HW111 2012J | 20 | 12 | 15 | 50 | J X | 0.61 | 195 |
| HW111 2012K | 20 | 12 | 15 | 50 | K X | 0.61 | 195 |
| HW111 2012T | 20 | 12 | 15 | 50 | T X | 0.61 | 195 |
| HW111 2016E | 20 | 16 | 15 | 50 | E X | 0.66 | 257 |
| HW111 2016J | 20 | 16 | 15 | 50 | J X | 0.66 | 257 |
| HW111 2016K | 20 | 16 | 15 | 50 | K X | 0.66 | 257 |
| HW111 2016T | 20 | 16 | 15 | 50 | T X | 0.66 | 257 |
| HW111 2024E | 20 | 24 | 15 | 50 | E X | 0.81 | 356 |
| HW111 2024J | 20 | 24 | 15 | 60 | J X | 0.81 | 356 |
| HW111 2024K | 20 | 24 | 15 | 60 | K X | 0.81 | 356 |
| HW111 2024T | 20 | 24 | 15 | 60 | T X | 0.81 | 356 |
| HW111 2036J | 20 | 36 | 15 | 70 | J X | 0.95 | 513 |
| HW111 2036K | 20 | 36 | 15 | 70 | K X | 0.95 | 513 |
| HW111 2036T | 20 | 36 | 15 | 70 | T X | 0.95 | 513 |
| HW111 1601E | 16 | 1 | 15 | 35 | E X | 0.28 | 46 |
| HW111 1601J | 16 | 1 | 15 | 35 | J X | 0.28 | 46 |
| HW111 1601K | 16 | 1 | 15 | 35 | K X | 0.28 | 46 |
| HW111 1601T | 16 | 1 | 15 | 35 | T X | 0.28 | 46 |
Application:
For use in thermocouple extension applications where protection from electrostatic interference is required. UL listed as Type PLTC and approved for installation indoors or outdoors, aerially, in conduits, ducts and cable trays in circuits not exceeding 300 volts. May be used in NEC Class 1, Division 2 hazardous locations.
Conductors:
Annealed, solid thermocouple extension-grade alloys calibrated to standard limits of error per ANSI-MC96.1.
Insulation:
Flame-retardant PVC per UL Standard 13, color coded per ANSI-MC96.1.
Communication Wire:
Multipair constructions contain a 7-strand bare copper orange PVC-insulated communication wire.
Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.
Jacket:
Sunlight-resistant PVC color coded per ANSI-MC96.1. A ripcord is applied longitudinally under the jacket to facilitate stripping.
Flame Tests:
UL 1581 70,000 BTU/hr flame test
Additional Standards:
NEC Type ITC approved for use in hazardous locations per Articles 501, 502, 503 and 504
