Specification:
HW201
Power Cable
2.4KV UL Type MV-90, 90°C
Single Conductor, Non-Shielded
EPR Insulation, Hypalon Jacket – Heavy Wall
2.4KV 133% Insulation Level
Copper Conductor
| Catalog Number | Size AWG/kcmil | No. of Strands | Insulation Thickness Mils | Jacket Thickness Mils | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|
| HW201 00801 | 8 | 7 | 125 | 80 | 0.57 | 195 |
| HW201 00601 | 6 | 7 | 125 | 80 | 0.65 | 260 |
| HW201 00401 | 4 | 7 | 125 | 80 | 0.70 | 330 |
| HW201 00201 | 2 | 7 | 125 | 80 | 0.76 | 405 |
| HW201 00101 | 1 | 19 | 125 | 80 | 0.80 | 505 |
| HW201 10101 | 1/0 | 19 | 125 | 80 | 0.84 | 590 |
| HW201 20101 | 2/0 | 19 | 125 | 80 | 0.88 | 700 |
| HW201 30101 | 3/0 | 19 | 125 | 95 | 0.96 | 860 |
| HW201 40101 | 4/0 | 19 | 125 | 95 | 1.02 | 1020 |
| HW201 25001 | 250 | 37 | 140 | 110 | 1.14 | 1210 |
| HW201 35001 | 350 | 37 | 140 | 110 | 1.24 | 1525 |
| HW201 50001 | 500 | 37 | 140 | 110 | 1.37 | 2130 |
| HW201 75001 | 750 | 61 | 155 | 125 | 1.62 | 3090 |
| HW201 10001 | 1000 | 61 | 155 | 125 | 1.76 | 3960 |
Application:
For use in caustic environments in power circuits up to 2.4kv when installed in open air, conduit, duct, cable tray when CT rated, in wet and dry locations. Used for applications in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. National Electric Code approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductor:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.
Insulation:
Ethylene propylene rubber (EPR) per ICEA standards.
Jacket:
Chlorosulfonated polyethylene (CSPE/Hypalon?) per ICEA standards.
Flame Tests:
UL and IEEE 383 70,000 BTU/hr flame test ? for CT-listed sizes 1/0 AWG and larger.
Additional Standards:
•ICEA S-96-659
•UL Standard 1072
•NEMA WC71
Note:
•CT rating must be requested. CT ratings are available on sizes 1/0 AWG and larger.
•PVC jacket available upon request.
