Specification:
HW202
Power Cable
5KV UL Type MV-90, 90°C
Single Conductor, Shielded
XLP Insulation, PVC Jacket
100% or 133% Insulation Level
Copper Conductor
| Catalog Number | Size AWG/kcmil | No. of Strands | Insulation Thickness Mils | Jacket Thickness Mils | Insulation Diameter Inch | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|
| HW202 00801 | 8 | 7 | 90 | 60 | 0.34 | 0.58 | 165 |
| HW202 00601 | 6 | 7 | 90 | 60 | 0.38 | 0.6 | 205 |
| HW202 00401 | 4 | 7 | 90 | 60 | 0.45 | 0.71 | 290 |
| HW202 00201 | 2 | 7 | 90 | 60 | 0.51 | 0.77 | 385 |
| HW202 00101 | 1 | 19 | 90 | 60 | 0.55 | 0.81 | 440 |
| HW202 10101 | 1/0 | 19 | 90 | 80 | 0.59 | 0.89 | 565 |
| HW202 20101 | 2/0 | 19 | 90 | 80 | 0.63 | 0.94 | 665 |
| HW202 30101 | 3/0 | 19 | 90 | 80 | 0.68 | 0.99 | 790 |
| HW202 40101 | 4/0 | 19 | 90 | 80 | 0.74 | 1.04 | 950 |
| HW202 25001 | 250 | 37 | 90 | 80 | 0.80 | 1.10 | 1095 |
| HW202 35001 | 350 | 37 | 90 | 80 | 0.90 | 1.21 | 1445 |
| HW202 50001 | 500 | 37 | 90 | 80 | 1.03 | 1.35 | 1960 |
| HW202 75001 | 750 | 61 | 90 | 80 | 1.22 | 1.54 | 2825 |
| HW202 10001 | 1000 | 61 | 90 | 80 | 1.37 | 1.69 | 3645 |
Application:
For use in power circuits up to 5KV when installed in open air, conduit, duct, or direct buried in earth, in wet and dry locations. Used for applications in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. UL approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductor:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.
Insulation:
Cross-linked polyethylene (XLP) per ICEA S-97-682 with a semi-conducting insulation shield.
Shield:
Shielding wires meet ICEA standards.
Jacket:
Sunlight-resistant PVC per ICEA S-97-682 and UL Standard 1072.
Additional Standards:
•ICEA S-93-639
•NEMA WC74
•AEIC CS8
•Federal Specification J-C-30B
Note:
CT rating must be requested. CT ratings are available on sizes 1/0AWG and larger.
