Specification:
HW204
Power Cable – Unishield
5KV/8KV UL Type MV-105, 105°C
Single Conductor, Shielded
EPR Insulation, CPE Jacket
5KV 133%, 8KV 100% Insulation Level
Copper Conductor
| Catalog Number | Size AWG/ kcmil |
No. of Strands | Insul Thickness Mils | Jacket Thickness Mils | Insul Diameter Inch | Drain Wire Size AWG | Cond. Diameter Inch | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|---|---|
| HW204 00201 | 2 | 7 | 115 | 75 | 0.54 | 20 | 0.27 | 0.71 | 411 |
| HW204 10101 | 1/0 | 19 | 115 | 75 | 0.62 | 20 | 0.34 | 0.79 | 563 |
| HW204 20101 | 2/0 | 19 | 115 | 75 | 0.66 | 19 | 0.38 | 0.89 | 675 |
| HW204 40101 | 4/0 | 19 | 115 | 80 | 0.76 | 19 | 0.48 | 0.94 | 961 |
| HW204 25001 | 250 | 37 | 115 | 80 | 0.81 | 18 | 0.53 | 1.00 | 1122 |
| HW204 35001 | 350 | 37 | 115 | 80 | 0.91 | 18 | 0.62 | 1.11 | 1476 |
| HW204 50001 | 500 | 37 | 115 | 80 | 1.03 | 17 | 0.74 | 1.24 | 2015 |
| HW204 75001 | 750 | 61 | 115 | 85 | 1.22 | 17 | 0.91 | 1.48 | 2893 |
| HW204 10001 | 1000 | 61 | 115 | 100 | 1.38 | 16 | 1.06 | 1.61 | 3786 |
Application:
For use in power circuits up to 8KV when installed in open air, conduit, duct, cable tray when CT rated, or direct buried in earth, in wet and dry locations. Used for critical applications in harsh and caustic environments in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductor:
Compact soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-496, with a semi-conducting conductor shield.
Insulation:
Ethylene propylene rubber (EPR) per ICEA S-97-682.
Shield:
Six (6) corrugated copper shield wires longitudinally embedded in an exterior semi-conducting CPE jacket per ICEA S-97-682.
Jacket:
Sunlight-resistant CPE per ICEA S-97-682 and UL Standard 1072.
Flame Tests:
•IEEE 383 70,000 BTU/hr flame test – CT-listed sizes 1/0AWG and larger
Additional Standards:
•ICEA S-93-639
•NEMA WC74
•AEIC CS8
Note:
CT rated on sizes 1/0 AWG and larger.
