Specification:
HW213
Power Cable
5KV/8KV UL Type MV-105, 105°C
Three Conductor, Shielded
EPR Insulation, PVC Jacket
5KV 133%, 8KV 100% Insulation Level
Copper Conductor
| Catalog Number | Size AWG/kcmil | No. of Strands | Insulation Thickness Mils | Jacket Thickness Mils | Insulation Diameter Inch | Explosion Proof Connector UN | Copper Grounding Condutor AWG | Overall Diameter Inch | Net Weight Lbs/Mft |
|---|---|---|---|---|---|---|---|---|---|
| HW213 00603 | 6 | 7 | 115 | 80 | 0.47 | 424UN05 | 6 | 1.38 | 1052 |
| HW213 00403 | 4 | 7 | 115 | 80 | 0.52 | 424UN06 | 6 | 1.48 | 1265 |
| HW213 00203 | 2 | 7 | 115 | 80 | 0.57 | 424UN06 | 6 | 1.61 | 1608 |
| HW213 00103 | 1 | 19 | 115 | 110 | 0.61 | 424UN06 | 4 | 1.75 | 1989 |
| HW213 10103 | 1/0 | 19 | 115 | 110 | 0.65 | 424UN07 | 4 | 1.84 | 2257 |
| HW213 20103 | 2/0 | 19 | 115 | 110 | 0.70 | 424UN07 | 4 | 1.93 | 2609 |
| HW213 30103 | 3/0 | 19 | 115 | 110 | 0.75 | 424UN07 | 3 | 2.04 | 3073 |
| HW213 40103 | 4/0 | 19 | 115 | 110 | 0.80 | 424UN08 | 3 | 2.16 | 3598 |
| HW213 25003 | 250 | 37 | 115 | 110 | 0.86 | 424UN08 | 3 | 2.30 | 4094 |
| HW213 35003 | 350 | 37 | 115 | 110 | 0.96 | 424UN08 | 2 | 2.52 | 5288 |
| HW213 50003 | 500 | 37 | 115 | 140 | 1.09 | 424UN09 | 1 | 2.89 | 7256 |
| HW213 75003 | 750 | 61 | 115 | 140 | 1.28 | - – - | 1 | 3.77 | 10128 |
Application:
For use in primary power and distribution circuits up to 8KV when installed in open air, conduit, duct, cable tray when CT rated, or direct buried in earth, in wet and dry locations. Used for applications in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductor:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.
Insulation:
Ethylene propylene rubber (EPR) per ICEA S-97-682 with a semi-conducting insulation shield.
Shield:
Uncoated copper tape with a minimum 12.5% overlap per ICEA S-97-682.
Grounding Conductor:
Compressed soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 sized in accordance to UL Standard 1072.
Jacket:
Sunlight-resistant PVC per ICEA S-97-682 and UL Standard 1072.
Flame Tests:
UL and IEEE 383 70,000 BTU/hr flame test – CT-listed sizes 1/0AWG and larger.
Color Code:
ICEA Method 4
Additional Standards:
•ICEA S-93-639
•NEMA WC74
•AEIC CS8
•Federal Specification J-C-30B
Connectors:
Explosion Proof, Class I, Division 2: 424UN series ? aluminum exterior components, nickel-plated brass interior components
Note:
CT rating must be requested. CT ratings are available on all sizes.
